WaveAce Oscilloscope

WaveAce 시리즈

좋은 오실로스코프란 테스트 작업을 단순화하고 문제를 검색 및 디버깅하는 시간을 단축시켜야 합니다. WaveAce 는 긴 메모리, 컬러 화면, 다양한 측정 기능과 고급 트리거, 그리고 문제해결 능력을 향상시키고 디버깅 시간을 줄여주는 탁월한 툴을 제공합니다. 60 MHz – 300 MHz 대역폭에서 최고 2 GS/s의 샘플 속도와 채널 당 최대 9ktps와 18kpts의 파형 메모리를 지원하는 WaveAce는 소형의 경제적인 오실로스코프가 요구하는 성능 그 이상을 제공합니다.

- 60 MHz ~ 300 MHz 대역폭

- 2채널 9 kpts 메모리(18 kpts/1채널)

- 32 자동 측정 파라메터

- 5.7" 컬러 디스플레이

- USB 연결 - 프린터, 메모리, PC 원격제어



긴 포착과 확대
휴대형 오실로스코프의 경우 적은 파형 메모리로 인해 포착 시간이 짧아지게 됩니다. WaveAce는 동급의 경쟁 제품 대비 2-3배 긴 9 Kpts/Ch와 4 kpts/Ch의 메모리를 갖고 있습니다. 더 긴 메모리는 긴 포착이 가능하므로 각 트리거에서 더 많은 파형 정보를 보여줍니다. 내장된 확대기능을 사용하면 파형의 자세한 부분을 추가로 볼 수 있습니다.
디지털 필터
WaveAce에서는 각 채널에서 디지털 필터 기능을 사용할 수 있습니다. 로우-패스, 하이-패스, 밴드-패스와 밴드-스톱 필터를 제공하여 원하는 주파수만 분리하여 필터링합니다.
트리거
모든 신호를 에지 트리거로만 해결할 수는 없습니다. 기본 에지 트리거 외에 펄스폭, 비디오, 슬로프 (상승 시간) 등의 다양한 트리거를 제공합니다.
자동 측정
32개의 자동 측정 기능이 기본 탑재되어 귀하의 측정 업무가 한결 편해집니다. 복잡하지 않게 최대 4개 측정결과를 표시하거나, 또는 한번에 32개 측정값을 모두 표시할 수 있습니다. 다양한 고급 타이밍 파라메터들이 2개의 서로다른 신호간 관련성 정보를 보여줍니다.
파형 연산
WaveAce는 Add, Substract, Multiply, Divide, FFT의 5가지 연산 기능을 제공합니다. FFT는 4개의 윈도우와 2개의 다른 수직 축 중에서 선택할 수 있습니다
다양한 연결
WaveAce는 패널 전면부에 이미지나 파형, 설정 등을 저장할 수 있는 USB 호스트 포트를 갖추고 있습니다. 패널 뒷면에는 USB 디바이스 포트가 있어서 PC나 프린터로 바로 연결 가능합니다. EasyScope 소프트웨어를 설치하면 PC와 쉽게 연결 및 통신이 되고 USB 나 RS-232를 통해 오실로스코프 화면, 측정, 파형 데이터 및 프런트 패널 제어를 사용할 수 있습니다.
Pass/Fail 테스트
내장된 패스/패일 마스크 테스트를 사용하면 빠르게 문제를 인식하고 발생한 시점을 알려줍니다. 패스/패일 결과 히스토리가 스크린에 표시됩니다.
파형 시퀀스 레코더
최고 2500개의 파형을 연속으로 포착하여 재생하고 귀하의 시스템에 문제를 일으키는 런트나 글리치를 찾아냅니다.
대용량 메모리
내부 메모리로부터 파형 및 설정을 저장하고 불러오는 기능이 테스트 및 디버깅 기간을 절약할 수 있습니다. WaveAce는 최대 20개의 파형, 20개의 설정, 2개의 레퍼런스 파형을 저장할 수 있습니다
포착 모드
여러 어플리케이션들은 서로 다른 포착 모드가 필요합니다. WaveAce는 Real Time, Equivalent Time, Peak Detect, Averaging 의 다양한 모드를 제공하므로 어떤 파형이라도 포착 및 표시할 수 있습니다
WaveAce 102
Main Specifications
Bandwidth
  60 MHz
Rise Time
  5.8 ns
Input Channels
  2
Display
  5.7" Color, 320 x 240 Resolution
Sample Rate (single-shot)
  500 MS/s (interleaved), 250 MS/s (all channels)
Sample Rate (RIS)
  50 GS/s
Vertical Resolution
  8-bits
Vertical Sensitivity
  2 mV/div?5 V/div
BW Limiting Filters
  20 MHz
Maximum Input Voltage
  400 V Pk
Input Coupling
  1 MΩ|| 13 pF
Input Impedance
  GND, DC 1 MΩ, AC 1 MΩ
Probes
  10:1, 1:1 Switchable Passive Probe (one per channel)
Time Base Range
  5 ns/div?50 s/div
Memory Length
  4 kpts/Ch
Peak Detect Period
  10 ns

Triggering System
Standard Triggers
  Edge, Pulse Width, Video, Slope (Rise Time), Alternate

WaveStream¢â Fast Viewing Mode
Waveforms
  Record and playback a sequence of up to 2500 waveforms

Measure, Zoom, Math, and Replay
Measure
  Amplitude, Average, Base, Burst Width, Cyclic RMS, + Duty Cycle, - Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Peak-Peak, Period, Phase, Rise Time, RMS, Top, + Width, - Width. Plus 8 advanced parameters for edge to edge timing measurements
Math
  Add, Subtract, Multiply, Divide, FFT (up to 1 kpts with Rectangular, Von Hann, Hamming or Blackman windows)

Physical Dimensions
Dimensions (HWD)
  154 mm x 305 mm x 133 mm; 6" x 12" x 5.2" (height excludes feet)
Shipping Weight
  2.3 kg; 5 lbs.

WaveAce 112
Main Specifications
Bandwidth
  100 MHz
Rise Time
  3.5 ns
Input Channels
  2
Display
  5.7" Color, 320 x 240 Resolution
Sample Rate (single-shot)
  500 MS/s (interleaved), 250 MS/s (all channels)
Sample Rate (RIS)
  50 GS/s
Vertical Resolution
  8-bits
Vertical Sensitivity
  2 mV/div?5 V/div
BW Limiting Filters
  20 MHz
Maximum Input Voltage
  400 V Pk
Input Coupling
  1 MΩ|| 13 pF
Input Impedance
  GND, DC 1 MΩ, AC 1 MΩ
Probes
  10:1, 1:1 Switchable Passive Probe (one per channel)
Time Base Range
  5 ns/div?50 s/div
Memory Length
  4 kpts/Ch
Peak Detect Period
  10 ns

Triggering System
Standard Triggers
  Edge, Pulse Width, Video, Slope (Rise Time), Alternate

WaveStream¢â Fast Viewing Mode
Waveforms
  Record and playback a sequence of up to 2500 waveforms

Measure, Zoom, Math, and Replay
Measure
  Amplitude, Average, Base, Burst Width, Cyclic RMS, + Duty Cycle, - Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Peak-Peak, Period, Phase, Rise Time, RMS, Top, + Width, - Width. Plus 8 advanced parameters for edge to edge timing measurements
Math
  Add, Subtract, Multiply, Divide, FFT (up to 1 kpts with Rectangular, Von Hann, Hamming or Blackman windows)

Physical Dimensions
Dimensions (HWD)
  154 mm x 305 mm x 133 mm; 6" x 12" x 5.2" (height excludes feet)
Shipping Weight
  2.3 kg; 5 lbs.

WaveAce 202
Main Specifications
Bandwidth
  60 MHz
Rise Time
  5.8 ns
Input Channels
  2
Display
  5.7" Color, 320 x 240 Resolution
Sample Rate (single-shot)
  1 GS/s (all channels)
Sample Rate (RIS)
  50 GS/s
Vertical Resolution
  8-bits
Vertical Sensitivity
  2 mV/div?5 V/div
BW Limiting Filters
  20 MHz
Maximum Input Voltage
  400 V Pk
Input Coupling
  1 MΩ|| 13 pF
Input Impedance
  GND, DC 1 MΩ, AC 1 MΩ
Probes
  10:1, 1:1 Switchable Passive Probe (one per channel)
Time Base Range
  2.5 ns/div?50 s/div
Memory Length
  9 kpts/Ch, (18 kpts interleaved)
Peak Detect Period
  10 ns

Triggering System
Standard Triggers
  Edge, Pulse Width, Video, Slope (Rise Time), Alternate

WaveStream¢â Fast Viewing Mode
Waveforms
  Record and playback a sequence of up to 2500 waveforms

Measure, Zoom, Math, and Replay
Measure
  Amplitude, Average, Base, Burst Width, Cyclic RMS, + Duty Cycle, - Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Peak-Peak, Period, Phase, Rise Time, RMS, Top, + Width, - Width. Plus 8 advanced parameters for edge to edge timing measurements
Math
  Add, Subtract, Multiply, Divide, FFT (up to 1 kpts with Rectangular, Von Hann, Hamming or Blackman windows)

Physical Dimensions
Dimensions (HWD)
  154 mm x 305 mm x 133 mm; 6" x 12" x 5.2" (height excludes feet)
Shipping Weight
  2.3 kg; 5 lbs.

WaveAce 212
Main Specifications
Bandwidth
  100 MHz
Rise Time
  3.5 ns
Input Channels
  2
Display
  5.7" Color, 320 x 240 Resolution
Sample Rate (single-shot)
  1 GS/s (all channels)
Sample Rate (RIS)
  50 GS/s
Vertical Resolution
  8-bits
Vertical Sensitivity
  2 mV/div?5 V/div
BW Limiting Filters
  20 MHz
Maximum Input Voltage
  400 V Pk
Input Coupling
  1 MΩ|| 13 pF
Input Impedance
  GND, DC 1 MΩ, AC 1 MΩ
Probes
  10:1, 1:1 Switchable Passive Probe (one per channel)
Time Base Range
  2.5 ns/div?50 s/div
Memory Length
  9 kpts/Ch, (18 kpts interleaved)
Peak Detect Period
  10 ns

Triggering System
Standard Triggers
  Edge, Pulse Width, Video, Slope (Rise Time), Alternate

WaveStream¢â Fast Viewing Mode
Waveforms
  Record and playback a sequence of up to 2500 waveforms

Measure, Zoom, Math, and Replay
Measure
  Amplitude, Average, Base, Burst Width, Cyclic RMS, + Duty Cycle, - Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Peak-Peak, Period, Phase, Rise Time, RMS, Top, + Width, - Width. Plus 8 advanced parameters for edge to edge timing measurements
Math
  Add, Subtract, Multiply, Divide, FFT (up to 1 kpts with Rectangular, Von Hann, Hamming or Blackman windows)

Physical Dimensions
Dimensions (HWD)
  154 mm x 305 mm x 133 mm; 6" x 12" x 5.2" (height excludes feet)
Shipping Weight
  2.3 kg; 5 lbs.

WaveAce 222
Main Specifications
Bandwidth
  200 MHz
Rise Time
  1.75 ns
Input Channels
  2
Display
  5.7" Color, 320 x 240 Resolution
Sample Rate (single-shot)
  2 GS/s (interleaved), 1 GS/s (all channels)
Sample Rate (RIS)
  50 GS/s
Vertical Resolution
  8-bits
Vertical Sensitivity
  2 mV/div?5 V/div
BW Limiting Filters
  20 MHz
Maximum Input Voltage
  400 V Pk, 5 Vrms (50 Ω)
Input Coupling
  1 MΩ|| 13 pF
Input Impedance
  GND, DC 1 MΩ, AC 1 MΩ
Probes
  10:1, 1:1 Switchable Passive Probe (one per channel)
Time Base Range
  2.5 ns/div?50 s/div
Memory Length
  9 kpts/Ch, (18 kpts interleaved)
Peak Detect Period
  10 ns

Triggering System
Standard Triggers
  Edge, Pulse Width, Video, Slope (Rise Time), Alternate

WaveStream¢â Fast Viewing Mode
Waveforms
  Record and playback a sequence of up to 2500 waveforms

Measure, Zoom, Math, and Replay
Measure
  Amplitude, Average, Base, Burst Width, Cyclic RMS, + Duty Cycle, - Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Peak-Peak, Period, Phase, Rise Time, RMS, Top, + Width, - Width. Plus 8 advanced parameters for edge to edge timing measurements
Math
  Add, Subtract, Multiply, Divide, FFT (up to 1 kpts with Rectangular, Von Hann, Hamming or Blackman windows)

Physical Dimensions
Dimensions (HWD)
  154 mm x 305 mm x 133 mm; 6" x 12" x 5.2" (height excludes feet)
Shipping Weight
  2.3 kg; 5 lbs.

WaveAce 232
Main Specifications
Bandwidth
  300 MHz
Rise Time
  1.2 ns
Input Channels
  2
Display
  5.7" Color, 320 x 240 Resolution
Sample Rate (single-shot)
  2 GS/s (interleaved), 1 GS/s (all channels)
Sample Rate (RIS)
  50 GS/s
Vertical Resolution
  8-bits
Vertical Sensitivity
  2 mV/div?5 V/div
BW Limiting Filters
  20 MHz
Maximum Input Voltage
  400 V Pk, 5 Vrms (50 Ω)
Input Coupling
  1 MΩ|| 13 pF
Input Impedance
  GND, DC 1 MΩ, AC 1 MΩ
Probes
  10:1, 1:1 Switchable Passive Probe (one per channel)
Time Base Range
  2.5 ns/div?50 s/div
Memory Length
  9 kpts/Ch, (18 kpts interleaved)
Peak Detect Period
  10 ns

Triggering System
Standard Triggers
  Edge, Pulse Width, Video, Slope (Rise Time), Alternate

WaveStream¢â Fast Viewing Mode
Waveforms
  Record and playback a sequence of up to 2500 waveforms

Measure, Zoom, Math, and Replay
Measure
  Amplitude, Average, Base, Burst Width, Cyclic RMS, + Duty Cycle, - Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Peak-Peak, Period, Phase, Rise Time, RMS, Top, + Width, - Width. Plus 8 advanced parameters for edge to edge timing measurements
Math
  Add, Subtract, Multiply, Divide, FFT (up to 1 kpts with Rectangular, Von Hann, Hamming or Blackman windows)

Physical Dimensions
Dimensions (HWD)
  154 mm x 305 mm x 133 mm; 6" x 12" x 5.2" (height excludes feet)
Shipping Weight
  2.3 kg; 5 lbs.

Â÷µ¿ ÇÁ·Îºê
AP03115 MHz Differential Probe
°íÀü¾Ð ÇÁ·Îºê
PPE1.2KV10:1/100:1 200/300 MHz 5M Ohm/100M Ohm
PPE20KV1000:1 100 MHz 100M Ohm High-Voltage Probe
PPE2KV100:1 400 MHz 100M Ohm High Voltage Probe
PPE4KV100:1 400 MHz 100M Ohm High-Voltage Probe
PPE5KV100:1 400 MHz 100M Ohm High-Voltage Probe
PPE6KV1000:1 400 MHz 5M Ohm High-Voltage Probe
¼öµ¿ ÇÁ·Îºê
PP01310:1/1:1, 10 Mohm/1 Mohm, 60 MHz, Passive Probe
PP01410:1/1:1, 10 Mohm/1 Mohm, 100 MHz, Passive Probe
PP01510:1/1:1, 10 Mohm/1 Mohm, 200 MHz, Passive Probe
PP01610:1, 10 Mohm, 300 MHz Passive Probe
 
(¿ì)135-280 ¼­¿ï °­³²±¸ ´ëÄ¡µ¿ 968-5 Àϵ¿ºôµù 10Ãþ TEL.02-3452-0400 FAX.02-3452-0490
Copyright © LeCroy Corporation 2009