|
LINbus TD Trigger and Decode
Trigger on exactly the message packets you want with powerful conditional DATA triggering.
Apply a color-coded, easy-to-understand, decode over your LIN messages. Search for and find
specific message packets in long acquisitions.
Leading Features
- LIN 1.3, 2.x, J2602 Supported
- Powerful and flexible triggering, including triggers for:
- Break (Start of Message)
- Message ID
- Message ID + DATA
- Error Frame
- Powerful conditional DATA triggering (>, ≥, <, ≤, <>, in range, out of range)
- Error Frame triggering supports multiple error frame types:
- Checksum
- Header Parity
- Sync Byte
- Any combination of the above
- Decode is performed quickly, even on long records, using advanced software algorithms
- Hexadecimal decodes
- Easily learn the LIN protocol with intuitive color-coded decode overlay
- Convenient table display with quick "zoom to message" capability
- Quick Search capability for specific message packets
Complete LIN Triggering- No Compromises
Full support for LIN 1.3, 2.x, and
J2602 ensures that no matter what
version of LIN you use, you'll be able
to trigger and decode. In addition, triggering
provides complete capability to
trigger on any event with completely
definable Message ID and DATA triggers,
or flexible Error Frame triggering.
Powerful Conditional Data Triggering
Completely isolate specific events
for better understanding and debug.
Use a conditional LIN DATA trigger to
select a range of DATA values to trigger
on, not just a single DATA value.
The Most Intuitive Decode
Patented software algorithms deconstruct
the waveform into protocol
decode information, then overlay
the decoded data on the waveform.
Depending on the timebase setting or
zoom ratio, the decode information is
condensed or expanded to better assist
in understanding events during short
or long acquisitions. Various sections
of the protocol are color-coded to make
it easy-to-understand, especially for
users new to LIN serial data. The decode
operation is fast-even with long acquisitions.
LIN busses with mixed LIN versions
are easily and completely decoded.
Convenient Table Display Summarizes Results
Turn your oscilloscope into a protocol
analyzer with the Table display of
decoded information. Custom configure
the Table to display only the information
you want and export Table data to an
Excel file. Touch a message in the table
and automatically zoom for detail.
Search and Zoom
LIN messages can be quickly located
by searching on Break, ID, or Error.
In a long acquisition, pressing NEXT
advances the single message view
to the message to the right or left of
the current message.
|
Definition |
| Protocol Setup |
Select LIN Version 1.3, 2.x, or SAE J2602. Select BitRate (1.2, 2.4, 4.8, 9.6, 10.417, 19.2 kb/s, or user-defined 1-20 kb/s) Decodes LIN messages on busses with mixed LIN Versions. |
|
Decode Capability |
| Format |
Hexadecimal |
| Decode Setup |
Threshold definition required. Default is to Percent amplitude. Select BitRate. |
| Decode Input |
Any analog Channel, Memory, or Math trace. |
| # of Decoded Waveforms |
Up to 4 busses may be decoded at one time. In addition, zooms can be displayed (with decoded information). |
| Location |
Overlayed over DATA waveform, on Grid. (Note: Use multi-grid if there is more than one decoder ON) |
| Visual Aid |
Color Coding for Start Bit, Stop Bit, Parity Bit, and DATA. Decode information is intelligently annotated based on timebase setting. |
|
Trigger Capability |
| Format |
Hexadecimal |
| Trigger Setup |
Trigger on (Sync) Break (Start of Message), Frame ID, Frame ID+DATA, Error Frame (Any combination of Checksum, Header Parity, or Sync Byte error frames) |
| ADDRESS (ID) Condition Setup |
Specify One ADDRESS with condition of = |
| DATA Condition Setup |
<=, <, =, >, >=, <>, in range, out of range, don’t care. |
| DATA Setup |
Hexadecimal: # Data Bytes = 0 to 8. Data can be defined by nibble. Triggers on that data pattern regardless of position or in user settable location. |
| Bit Rates |
1.2, 2.4, 4.8, 9.6, 10.417, 19.2 kb/s selectable. Any value from 1 kb/s to 20 kb/s may be entered. |
| Trigger Input |
Any analog Channel or the EXT input. |
| Trigger Design |
Internal to oscilloscope, settable like any other oscilloscope trigger. |
|
Search Capability |
| Pattern Search |
Search by Next Frame, Next ID in Hexadecimal format, or Next Error Frame. |
|
Other |
| Compatible With … |
TD (Trigger and Decode) Option fully compatible with WaveRunner Xi and WaveSurfer Xs (retrofit kits available and required for some WaveRunner Xi and WaveSurfer Xs oscilloscopes). D (Decode) Option fully compatible with WR6000, WP7000, and WM8000 Series. |
| |
|
;)
