Combining signal fidelity with an architecture that maximizes speed in every performance aspect, the new WavePro 7 Zi Series presents a totally new oscilloscope experience from 1.5 to 6 GHz bandwidths. Experience 50 Ω and 1 MΩ inputs for every channel and four inputs into high-speed front end amplifiers and analog to digital converters. Experience the new X-Stream II architecture that provides 10 to 20 times faster long memory performance than any other oscilloscope. Combined with LeCroy�s flexible and deep analysis toolbox, the WavePro 7 Zi Series gives an unforgettable experience for the debugging, validation, analysis and compliance testing of electronic designs.

- 1.5 GHz to 6 GHz

- X-Stream II streaming architecture

— 10�20 times faster than other oscilloscopes

- 15.3" WXGA Widescreen Display

- TriggerScan™ detects and captures more anomalies per second

Freedom from Limitations

WavePro 7 Zi excels in the way it offers general purpose utility never before seen in oscilloscopes from 1.5 to 6 GHz. All WavePro 7 Zi oscilloscopes contain selectable 50 Ω and 1 MΩ input capability. The 4 and 6 GHz models include both ProBus and ProLink input types which means eight probes can be attached and then multiplexed from the front panel or by remote control. The result� it�s easy to hook up a passive probe even on 4 or 6 GHz models�no more frustration and hassle of trying to find a 1 MΩ input adapter. Plus, any existing investment in LeCroy probes, such as current probes, single-ended or differential active probes, or high voltage probes, is fully leveraged. Perfect.

More Triggers Isolate More Problems More Effectively

A powerful combination of high bandwidth Edge and 10 different SMART triggers allow you to isolate the problem quickly and begin to focus on the cause. Most SMART triggers allow triggering on pulse widths or features as small as 200 ps. A high-speed serial trigger enables triggering on up to 2.7 Gb/s serial patterns of up to 80-bits in length. Built-in hardware clock recovery is also included.

TriggerScan™

TriggerScan uses high-speed hardware triggering capability with persistence displays to capture only the signals of interest and provide answers up to 100X faster that other methods. Traditional fast display update modes work best on frequent events occurring on slow edge rates while TriggerScan excels in finding infrequent events on fast edge rates.

WaveScan™ Advanced Search and Analysis Finds Problems that Triggers Won�t Find

The best trigger won�t find all unusual events�a more powerful capability is sometimes needed. WaveScan provides the ability to locate unusual events in a single capture (i.e., capture and search) or "scan" for an event in many acquisitions over a long period of time. Select from more than 20 search modes (frequency, rise time, runt, duty cycle, etc.), apply a search condition and begin scanning. When an event is found, WaveScan highlights the error on screen and displays a table listing the errors.

Fully Integrated Mixed Signal Oscilloscope (4+36) Option

Add Mixed Signal Oscilloscope (MSO) operation using the MS Series mixed signal options. These convenient add-ons connect to the LeCroy LBUS and quickly and simply provide capability to acquire up to 36 digital lines time-correlated with analog waveforms. No time is wasted in trying to learn how to connect, synchronize or operate a complicated logic analyzer since the MSOs are already completely integrated into the scope operation. In addition to acquiring digital lines, they are also helpful for monitoring low-speed signals, such as serial data clock, data, and chip select signals, thus preserving the analog channels for higher speed requirements.

LeCroy — The Acquisition Memory Leader

LeCroy has found a way to make long acquisition memory seamless and pain free to use. The WavePro 7 Zi Series� proprietary X-Stream II architecture supports capturing, zooming, measuring and analyzing multiple waveforms at 256 Mpts deep. What you experience is performance gains of 10�20X over what is available today. Whether looking at the acquired signal or while analyzing several screens of statistics, tracking a frequency or identifying complex patterns the WavePro 7 Zi is designed to perform.

Instantaneous Responsiveness

The first time you use the Zi oscilloscope you will experience responsiveness that you�ve never seen before. Acquiring and manipulating the longest record lengths and the most complex WaveShape Analysis are all easily handled at the same time. Whether you use the front panel or choose to make adjustments with a mouse or the touch screen, the system performs.

X-Stream II Architecture

Optimized for Fast Throughput

Designed for long memory operation and responsiveness X-Stream II technology enables high throughput of data�even when the oscilloscope is performing multiple 100 Mpts waveforms. It does so by eliminating the trade-offs between long memory length and quick processing. WavePro 7 Zi�s proprietary architecture design is augmented with an Intel® Core™ 2 Quad processor, high-speed serial data buses, a 64-bit OS and up to 8 GB of RAM.

Optimized for Long Memory

By using variable waveform segment lengths to improve the CPU cache memory efficiency the WavePro 7 Zi is designed for the fastest processing of long waveform records. The result—10-20 times faster processing compared to other oscilloscopes.

Optimized for Responsiveness

By dynamically allocating buffers where to maximize memory availability the WavePro 7 Zi Series embodies the fastest front panel responsiveness. Waveform previewing shows interim calculation results while a built in processing abort make front panel control changes instant by stopping the current process and allowing new waveforms to be positioned or zoomed—all without a lengthy recalculation.

Digital Filter Software Package (WPZi-DFP2)

DFP2 lets you implement Finite or Infinite Impulse Response filters to eliminate undesired spectral components, such as noise, and enhances your ability to examine important signal components. You can choose from a standared set of FIR or IIR filters. You can also design your own filters.

Spectrum Analyzer Analysis Package (WPZi-SPECTRUM)

The spectrum converts the controls of your oscilloscope to those of a spectrum analyzer. Adjust the frequency span, resolution and center frequency. Apply filtering to your signal and watch the frequency signature change in real time. A unique peak search labels the spectral components and presents frequency and level in a table. Touch any line jump to that peak.

Mixed Signal Oscilloscope Option (MS-250/MS-500)

The Mixed Signal option allows the WavePro 7 Zi to convert to a mixed signal oscilloscope with up to 36 digital channels. Channels are sampled at 2 GS/s up to 50 Mpts/Ch. Having up to 36 digital inputs timesynchronized with four analog channels extends the oscilloscope's use to provide a total system view.

Jitter and Timing Analysis Package (WPZi-JTA2)

Specialized timing parameters measure period, cycle-cycle, half period, width, etc. jitter on a variety of signals. Use the three views of jitter (statistical, time, and frequency) to understand root cause and to debug problems. Histograms provide understanding of statistical distributions. Tracks provide a means to show time-correlated peaks of jitter, and compare to other signals. FFTs provide the ability to debug root causes of high in-circuit jitter.

WavePro 715Zi

Analog Bandwidth @ 50 Ω (-3 dB)		1.5 GHz
Rise Time (typical)		235 ps
Input Channels		4
Bandwidth Limiters		20 MHz, 200 MHz
Input Impedance		50 Ω or 1 MΩ\|\|15pF, 10 MΩ \|\| 11 pF with supplied Probe
Input Coupling		1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage		50 Ω: �5 Vrms
Vertical Resolution		8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity		50 Ω: 2 mV�1 V/div, fully variable (2-9.99 mV/div via zoom); 1 MΩ: 2 mV�10 V/div, fully variable
DC Gain Accuracy		�1.5% of full scale
Offset Range		50 Ω:
Offset Accuracy		�(1.5% of full scale + 1.0% of offset value + 1 mV)
Timebases		Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
Time/Division Range		20 ps/div�1000 s/div (RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1000 s/div)
Clock Accuracy		< 1 ppm
Jitter Noise Floor		1.5 ps (Typical)
Trigger and Interpolator Jitter		3 psrms (typical)
Sample Rate and Delay Time Accuracy		< 0.06 / SR + (1 ppm * Reading) (rms)
Channel-Channel Deskew Range		�9 x time/div. setting, 100 ms max., each channel
External Timebase Reference (Input)		10 MHz; 50 Ω impedance, applied at the rear input
External Timebase Reference (Output)		10 MHz; 50 Ω impedance, output at the rear
External Sample Clock		0.1 Hz-100 MHz, 50 Ω or 1 MΩ impedance, applied at the auxiliary input
Single-Shot Sample Rate/Ch		20 GS/s on 2 Ch
Random Interleaved Sampling (RIS)		200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate		1,250,000 waveforms/s (in Sequence Mode, up to 4 channels)
Intersegment Time		800 ns
Standard Memory (4 Ch / 2 Ch) (Number of Segments)		10 M / 20 M
S - Memory Option		32 M / 64 M
M - Memory Option		64 M / 128 M
L - Memory Option		128 M / 256 M
Averaging		Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES)		From 8.5 to 11 bits vertical resolution
Envelope (Extrema)		Envelope, floor, or roof for up to 1 million sweeps
Interpolation		Linear or Sin x/x
Modes		Normal, Auto, Single, and Stop
Sources		Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
Coupling Mode		DC, AC, HFRej, LFRej
Pre-trigger Delay		0�100% of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay		0�10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
Hold-off by Time or Events		From 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range		�5 div from center
Trigger Sensitivity with Edge Trigger (Ch 1�4) ProBus Inputs		2 div @ < 1 GHz
Trigger Sensitivity with Edge Trigger (Ch 1�4) ProLink Inputs		Not Applicable
External Trigger Sensitivity		2 div @ < 1 GHz
External Trigger Input Range		Aux (�0.4 V); Aux/10 (�4 V)
Max. Trigger Frequency, SMART Trigger		1.0 GHz @ = 10 mV/div (minimum signal width setting 500 ps)
Edge/ Slope/ Line		Triggers when signal meets slope (positive, negative, or either) and level condition.
TV-Composite Video		Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
State or Edge Qualified		Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Dropout		Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern		Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don�t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
Glitch		Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Width (Signal or Pattern)		Triggers on positive or negative widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Interval (Signal or Pattern)		Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified)		Triggers on any source if a given state (or transition edge) has occurred on another source.
Runt		Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate		Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
"A" Trigger List		Edge, Window, Width, Glitch, Pattern, Pattern State, State, Dropout, Interval, Runt, Slew Rate, Serial Data (optional I2C, SPI, UART/RS-232, CAN, LIN, FlexRay)
"B" Trigger List		Edge
Exclusion Triggering		Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
Holdoff Between Sequential Triggers		Arming = Serial & Triggering = Anything, then min. time between events defined by serial pattern length
Data Rates		Not available
Pattern Length		Not available
Clock and Data Outputs		Not available
Clock Recovery Jitter		Not available
Clock Recovery Tracking/ Acquisition Range		Not available
Hardware Clock Recovery Loop BW		Not available
Optionally available		I²C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
Intensity		256 Intensity Levels, 1�100% adjustable via front panel control
Number of Channels		up to 4 simultaneously
Max Sampling Rate		40 GS/s (20 GS/s for WavePro 710Zi without WPZi-1GHZ-4X20GS option)
Waveforms		up to 2500 Waveforms/ second
Auto Setup		Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Find Vertical Scale		Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
Probes		Qty. (4) �10 Passive Probes
Probe System: ProBus		Probus (and ProLink on 4-6 GHz models). Automatically detects and supports a variety of compatible probes
Scale Factors		Automatically or manually selected depending on probe used
Calibration Output		1kHz square wave, 1Vp-p (typical), output to probe hook
Type		Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
Resolution		WXGA; 1280 x 768 pixels
Number of traces		Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles		Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
Waveform Representation		Sample dots joined, or sample dots only
Analog and Color-Graded Persistence		Variable saturation levels; stores each trace�s persistence data in memory
Trace Selection		Activate persistence on all or any combination of traces
Sweep Display Modes		All accumulated, or all accumulated with last trace highlighted
Persistence Types		Select analog, color, or three-dimensional
Persistence Aging		Select from 500 ms to infinity
Front Panel and Instrument Status		Store to the internal hard drive or to a USB-connected peripheral device.
Type		LeCroy LSIB
Transfer Rate		250 Mpt/s
Output Protocol		PCI Express, Gen 1 (4 lanes utilized for data transfer)
Control Protocol		TCP/IP
Command Set		Via Windows Automation, or via LeCroy Remote Command Set
Type		Intel� CoreTM 2 Quad, 2.5 GHz (or better)
Processor Memory		2 GB standard, up to 8 GB optional
Operating System		Microsoft Windows� Vista Business Edition (64-bit) with SP1
Oscilloscope Operating Software		Entire instrument including any installed optional applications packages operates within a single (X-Stream) Windows application
Real Time Clock		Date and time displayed with waveform an in hardcopy files. SNTP support to synchronize to precision internal clocks.
Zoom Expansion Traces		Display up to 4 Zoom and 8 Math/Zoom traces
Internal Waveform Memory		4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
Remote Control		Via Windows Automation, or via LeCroy Remote Command Set
GPIB Port		Supports IEEE � 488.2
LSIB Port (optional)		Supports PCIe Gen1 x4 protocol with LeCroy supplied API
USB Device Port (optional)		Type-B
Ethernet Port		Supports 10/100/1000 BaseT Ethernet interface (RJ45 port)
USB Ports		minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
External Monitor Port		15 pin D-Type WXGA compatible to support customer-supplied external monitor.
Serial Port		2 standard
Peripheral Bus		LeCroy LBUS standard
Signal Types		Select External Trigger or External Clock Input on the front panel
Coupling		50 Ω: DC; 1 MΩ: AC, DC, GND
Max. Input Voltage		50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
Signal Types		Select from calibrator, control signals or Off
Calibrator Signal		5 Hz�5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0�1 V into 1 MΩ)
Control Signals		Trigger enabled, trigger out, pass/fail status
Auto Calibration		Ensures specified DC and timing accuracy is maintained for 1 year minimum.
Voltage		100�240 VAC �10% at 45-66 Hz; 100-120 VAC �10% at 380-420 Hz; Automatic AC Voltage Selection
Max. Power Consumption		850 W/850 VA
Temperature (Operating)		+5 �C to +40 �C including CD-RW/DVD-ROM drive
Temperature (Non-Operating)		�20 �C to +60 �C
Humidity (Operating)		5% to 80% relative humidity (non-condensing) up to +31 �C.
Humidity (Non-Operating)		5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating)		Up to 10,000 ft. (3048 m) at or below +25 �C
Altitude (Non-Operating)		Up to 40,000 ft. (12,192 m)
Random Vibration (Operating)		0.5 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
Random Vibration (Non-Operating)		2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
Functional Shock		20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
Dimensions (HWD)		14"H x 18.4"W x 11.4"D (355 x 467 x 289 mm)
Weight		39.5 lbs. (18 kg)
Shipping Weight		57.5 lbs. (26 kg)
Certifications		CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
Warranty and Service		3-year warranty; calibration recommended annually.

WavePro 725Zi

Analog Bandwidth @ 50 Ω (-3 dB)		2.5 GHz
Rise Time (typical)		150 ps
Input Channels		4
Bandwidth Limiters		20 MHz, 200 MHz
Input Impedance		50 Ω or 1 MΩ\|\|15pF, 10 MΩ \|\| 11 pF with supplied Probe
Input Coupling		1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage		50 Ω: �5 Vrms
Vertical Resolution		8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity		50 Ω: 2 mV�1 V/div, fully variable (2-9.99 mV/div via zoom); 1 MΩ: 2 mV�10 V/div, fully variable
DC Gain Accuracy		�1.5% of full scale
Offset Range		50 Ω:
Offset Accuracy		�(1.5% of full scale + 1.0% of offset value + 1 mV)
Timebases		Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
Time/Division Range		20 ps/div�1000 s/div (RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1000 s/div)
Clock Accuracy		< 1 ppm
Jitter Noise Floor		1 ps (typical)
Trigger and Interpolator Jitter		2 psrms (typical)
Sample Rate and Delay Time Accuracy		< 0.06 / SR + (1 ppm * Reading) (rms)
Channel-Channel Deskew Range		�9 x time/div. setting, 100 ms max., each channel
External Timebase Reference (Input)		10 MHz; 50 Ω impedance, applied at the rear input
External Timebase Reference (Output)		10 MHz; 50 Ω impedance, output at the rear
External Sample Clock		0.1 Hz-100 MHz, 50 Ω or 1 MΩ impedance, applied at the auxiliary input
Single-Shot Sample Rate/Ch		40 GS/s on 2 Ch
Random Interleaved Sampling (RIS)		200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate		1,250,000 waveforms/s (in Sequence Mode, up to 4 channels)
Intersegment Time		800 ns
Standard Memory (4 Ch / 2 Ch) (Number of Segments)		10 M / 20 M
S - Memory Option		32 M / 64 M
M - Memory Option		64 M / 128 M
L - Memory Option		128 M / 256 M
Averaging		Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES)		From 8.5 to 11 bits vertical resolution
Envelope (Extrema)		Envelope, floor, or roof for up to 1 million sweeps
Interpolation		Linear or Sin x/x
Modes		Normal, Auto, Single, and Stop
Sources		Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
Coupling Mode		DC, AC, HFRej, LFRej
Pre-trigger Delay		0�100% of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay		0�10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
Hold-off by Time or Events		From 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range		�5 div from center
Trigger Sensitivity with Edge Trigger (Ch 1�4) ProBus Inputs		2 div @ < 2.5 GHz
Trigger Sensitivity with Edge Trigger (Ch 1�4) ProLink Inputs		Not Applicable
External Trigger Sensitivity		2 div @ < 1 GHz
External Trigger Input Range		Aux (�0.4 V); Aux/10 (�4 V)
Max. Trigger Frequency, SMART Trigger		2.0 GHz @ = 10 mV/div (minimum signal width setting 300 ps)
Edge/ Slope/ Line		Triggers when signal meets slope (positive, negative, or either) and level condition.
TV-Composite Video		Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
State or Edge Qualified		Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Dropout		Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern		Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don�t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
Glitch		Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Width (Signal or Pattern)		Triggers on positive or negative widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Interval (Signal or Pattern)		Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified)		Triggers on any source if a given state (or transition edge) has occurred on another source.
Runt		Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate		Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
"A" Trigger List		Edge, Window, Width, Glitch, Pattern, Pattern State, State, Dropout, Interval, Runt, Slew Rate, Serial Data (optional I2C, SPI, UART/RS-232, CAN, LIN, FlexRay)
"B" Trigger List		Edge
Exclusion Triggering		Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
Holdoff Between Sequential Triggers		Arming = Serial & Triggering = Anything, then min. time between events defined by serial pattern length
Data Rates		50 Mb/s - 1.25 Gb/s
Pattern Length		80 bits, NRZ or 8b10b
Clock and Data Outputs		400mVp-p (typical) AC coupled
Clock Recovery Jitter		1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density
Clock Recovery Tracking/ Acquisition Range		50 Mb/s - 1.25 Gb/s
Hardware Clock Recovery Loop BW		PLL Loop BW = Fbaud/5500, 50 Mb/s to 1.25 Gb/s (typical)
Optionally available		I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
Intensity		256 Intensity Levels, 1�100% adjustable via front panel control
Number of Channels		up to 4 simultaneously
Max Sampling Rate		40 GS/s (20 GS/s for WavePro 710Zi without WPZi-1GHZ-4X20GS option)
Waveforms		up to 2500 Waveforms/ second
Auto Setup		Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Find Vertical Scale		Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
Probes		Qty. (4) �10 Passive Probes
Probe System: ProBus		Probus (and ProLink on 4-6 GHz models). Automatically detects and supports a variety of compatible probes
Scale Factors		Automatically or manually selected depending on probe used
Calibration Output		1kHz square wave, 1Vp-p (typical), output to probe hook
Type		Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
Resolution		WXGA; 1280 x 768 pixels
Number of traces		Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles		Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
Waveform Representation		Sample dots joined, or sample dots only
Analog and Color-Graded Persistence		Variable saturation levels; stores each trace�s persistence data in memory
Trace Selection		Activate persistence on all or any combination of traces
Sweep Display Modes		All accumulated, or all accumulated with last trace highlighted
Persistence Types		Select analog, color, or three-dimensional
Persistence Aging		Select from 500 ms to infinity
Front Panel and Instrument Status		Store to the internal hard drive or to a USB-connected peripheral device.
Type		LeCroy LSIB
Transfer Rate		250 Mpt/s
Output Protocol		PCI Express, Gen 1 (4 lanes utilized for data transfer)
Control Protocol		TCP/IP
Command Set		Via Windows Automation, or via LeCroy Remote Command Set
Type		Intel� CoreTM 2 Quad, 2.5 GHz (or better)
Processor Memory		2 GB standard, up to 8 GB optional
Operating System		Microsoft Windows� Vista Business Edition (64-bit) with SP1
Oscilloscope Operating Software		Entire instrument including any installed optional applications packages operates within a single (X-Stream) Windows application
Real Time Clock		Date and time displayed with waveform an in hardcopy files. SNTP support to synchronize to precision internal clocks.
Zoom Expansion Traces		Display up to 4 Zoom and 8 Math/Zoom traces
Internal Waveform Memory		4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
Remote Control		Via Windows Automation, or via LeCroy Remote Command Set
GPIB Port		Supports IEEE � 488.2
LSIB Port (optional)		Supports PCIe Gen1 x4 protocol with LeCroy supplied API
USB Device Port (optional)		Type-B
Ethernet Port		Supports 10/100/1000 BaseT Ethernet interface (RJ45 port)
USB Ports		minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
External Monitor Port		15 pin D-Type WXGA compatible to support customer-supplied external monitor.
Serial Port		2 standard
Peripheral Bus		LeCroy LBUS standard
Signal Types		Select External Trigger or External Clock Input on the front panel
Coupling		50 Ω: DC; 1 MΩ: AC, DC, GND
Max. Input Voltage		50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
Signal Types		Select from calibrator, control signals or Off
Calibrator Signal		5 Hz�5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0�1 V into 1 MΩ)
Control Signals		Trigger enabled, trigger out, pass/fail status
Auto Calibration		Ensures specified DC and timing accuracy is maintained for 1 year minimum.
Voltage		100�240 VAC �10% at 45-66 Hz; 100-120 VAC �10% at 380-420 Hz; Automatic AC Voltage Selection
Max. Power Consumption		850 W/850 VA
Temperature (Operating)		+5 �C to +40 �C including CD-RW/DVD-ROM drive