|
WaveSurfer |
WaveSurfer |
WaveSurfer |
WaveSurfer |
WaveSurfer |
WaveSurfer |
|
424 * |
422 |
434 * |
432 |
454 * |
452 |
Bandwidth
(@ 50 Ω) |
200 MHz |
350 MHz |
500 MHz |
Rise Time (Typical) |
1.75 ns |
1 ns |
750 ps |
Input Channels |
4 |
2 |
4 |
2 |
4 |
2 |
Display |
10.4” Color flat-panel TFT-LCD, 800 x 600 SVGA, touch screen |
Sample Rate (single-shot) |
1 GS/s (all channels), 2 GS/s max (interleaved mode). |
Sample Rate (RIS mode) |
50 GS/s |
Standard Record Length |
1 Mpts/Ch (all channels), 2 Mpts/Ch (interleaved mode). |
Standard Capture Time |
up to 1 ms at full sample rate |
Vertical Resolution |
8 bits |
Vertical Sensitivity (V/div) |
1 mV/div–10 V/div (1 MΩ); 1 mV/div –2 V/div (50 Ω) |
Vertical (DC Gain) Accuracy |
±(1.5% + 0.5% of full scale) |
Vertical Offset Range |
±1 V (1-20 mV/div), ±10 V (50-200 mV/div), ±100 V (500 mV–10 V/div) |
Bandwidth Limit |
20 MHz |
20 MHz, 200 MHz |
Maximum Input Voltage |
CAT I: 400 Vmax (DC + Peak AC ≤ 5 kHz) with 1 MΩ input. 5 Vrms with 50 Ω input |
Input Coupling |
AC, DC, GND (DC and GND for 50 Ω) |
Input Impedance |
1 MΩ || 16 pF, or 50 Ω ±1%, |
Probing System |
BNC or ProBus |
Probes |
One PP007 (2.5 mm) per channel standard |
Time Base Range |
1 ns/div–1000 s/div |
500 ps/div–1000 s/div |
200 ps/div–1000 s/div |
Time Base Accuracy |
10 ppm |
Trigger Modes |
Normal, Auto, Single, and Stop |
Trigger Sources |
Any input channel, External, Ext/10, or line; slope and level unique to each source (except for line trigger) |
Trigger Coupling |
DC, AC, HF, HFRej, LFRej |
Pre-trigger Delay |
0–100% of full scale |
Post-trigger Delay |
0–10,000 divisions |
Trigger Hold-off |
2 ns to 20 s or 1 to 99,999,999 events |
Internal Trigger Level Range |
±5 div from center |
External Trigger Range |
EXT/10 ±5 V; EXT ±500 mV |
Standard Triggers |
Edge |
Triggers when signal meets slope (positive, negative, or Window) and level condition. |
Glitch |
Triggers on positive or negative glitches with widths selectable from 2.5 ns to 20 s or on intermittent faults. Includes exclusion mode (trigger on intermittent faults by specifying the normal width period). |
Width |
Triggers on positive or negative pulse widths selectable from 2.5 ns to 20 s or on intermittent faults. Includes exclusion mode (trigger on intermittent faults by specifying the normal width period). |
Logic (Pattern) |
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. |
TV-Composite Video |
Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines). |
Optional SMART Triggers™
(WS-ADVTRIG option) |
Runt |
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 2 ns and 20s. Includes exclusion mode (trigger on intermittent faults by specifying the normal width or period). |
Slew Rate |
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 2 ns and 20 s. Includes exclusion mode (trigger on intermittent faults by specifying the normal width or period). |
Interval (Signal or Pattern) |
Triggers on intervals selectable between 2 ns and 20 s. |
Dropout |
Triggers if signal drops out for longer than selected time between 2 ns and 20 s. Includes exclusion mode (trigger on intermittent faults by specifying the normal width or period). |
Qualified (State or Edge) Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is 2 ns to 20 s, or 1 to 99,999,999 events. Includes exclusion mode (trigger on intermittent faults by specifying the normal width or period). |
Measure, Zoom, and Math Tools |
Standard Parameter Measurements |
Up to 6 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base (Low), Cyclic Area, Cyclic Mean, Cyclic RMS, Cyclic Std. Deviation, Delay, Duty, Fall Time (90%-10%), Fall Time (80%-20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10%-90%), Rise Time (20%-80%), RMS, Skew, Standard Deviation, Top (High), Width+, Width-. Measurements may be gated. |
Zooming |
Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area. |
Standard Math |
Operators include Sum, Difference, Product, Ratio, and FFT (up to 25 kpts with power spectrum output and rectangular, VonHann, and FlatTop windows). 1 math function may be defined at a time. |
Extended Math |
Adds the following additional math functions: Absolute Value, Averaging (summed and continuous), |
(WS-MATHSURF Option) |
Derivative, Envelope, Enhanced Resolution (to 11 bits), Floor, Integral, Invert, Reciprocal, Roof, Square, and Square Root. Also adds chaining of two math functions and rescaling to different units. |
WaveStream™ Fast Viewing Mode |
Intensity |
Not Available |
Number of Channels |
Not Available |
Max. Sampling Rate |
Not Available |
Waveforms/second (continuous) |
Not Available |
Operation |
Not Available |
Analog Persistence |
Type |
Analog or color-graded. |
Saturation |
Variable saturation level, adjustable from front panel. |
Aging Time |
Adjustable from 500 ms to infinity. |
Operation |
Front panel toggle between ON Analog, ON Color, or OFF (plus software user interface ON/OFF and type selectability). When ON, persistence applied to all waveforms. |
Automatic Setup |
Auto Setup |
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals. Vertical Find Scale automatically sets the vertical sensitivity and offset for the selected channel |
Setup and Waveform Storage |
Front Panel and
Instrument Status |
Save to the internal hard drive, over the network, or to a USB connected peripheral device. |
Waveform Traces |
Save to one of four internal memories with 16 bit resolution for recall/comparison |
Waveform Data |
Save to the internal hard drive, over the network, or to a USB connected peripheral device. |
Documentation and Connectivity |
Printing |
Connect to any Windows® XP-compatible printer using the 25-pin D-type female (Centronics) printer port. Load any standard Windows® XP printer driver onto the unit as future needs require. |
Email |
Configure the unit to send an email of a screen image in a variety of formats using MAPI (i.e. through a default email program) or SMTP (no additional program needed). |
Waveform Memories |
Save waveform data as a reference trace to be compared to channels, zooms, or math functions. |
Waveform File Data |
Save waveform data in the following formats: Binary, ASCII, Excel, Mathcad, MATLAB. |
Screen Image |
Save a screen image to the internal hard drive, a user-supplied USB memory stick, or any other peripheral connected to one of the three USB 2.0 ports. Image can be saved in a variety of formats, and with white or black background. |
Waveform Labeling
(Annotation) |
Attach up to 10 labels to any combination of waveforms. Labels appear on screen images. |
Hardcopy Front Panel Button |
Configure the front panel Hardcopy button to send an email, save a screen image, save waveform
file data, and save to the clipboard. |
Networking |
Standard 10/100Base-T Ethernet interface (RJ-45 connector). Connect to any network using DHCP with automatically assigned IP address. |
Remote Control |
Via Windows automation, or via LeCroy Remote Command Set (via Ethernet or GPIB) |
USB Ports |
3 USB ports (one on front of instrument) support Windows compatible devices |
External Monitor
Port Standard |
15-pin D-Type female SVGA-compatible connector for external color display |
Parallel Port |
25-pin D-type female (Centronics) |
Serial Port |
9-pin D-type male (not for remote oscilloscope control) |
Audio Port |
Mic Input, Line Input, Line Output |
GPIB Port (Accessory) |
Supports IEEE– 488.2 (using NI USB-GPIB-B) |
Outputs |
Calibrator |
1 kHz square wave, +1.0 V into 1 MΩ, output on front panel test point and ground lug |
Control Signals
|
Rear Panel: TTL level, BNC output; Choice of trigger ready, trigger out, pass/fail status.(output resistance 300 Ω ±10%) |
Environmental and Safety |
Temperature (Operating) |
+5 °C to +40 °C |
Temperature (Non-Operating) |
-20 °C to +60 °C |
Humidity (Operating) |
5% to 80% relative humidity (non-condensing) at ² 30 °C. Upper limit derates to 55% relative humidity (non-condensing) at +40 °C. |
Humidity (Non-Operating) |
5% to 95% relative humidity (non-condensing) as tested per MIL–PRF–28800F. |
Altitude (Operating) |
up to 3048 m (10,000 ft) at up to 25 °C |
Altitude (Non-Operating) |
up to 12,190 m (40,000 ft) |
Vibration (Operating) |
Random vibration, 0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes |
Vibration (Non-Operating) |
Random vibration, 2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes |
Functional Shock |
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total |
Certification |
UL (Std. UL 61010-1 2nd Edition) & cUL (Std. CSA C22.2 No. 61010-1-04) Listed. CE Compliant. EMC Directive 89/336/EEC; EN 61326:1997/A3:2003. Low Voltage Directive 73/23/EEC; EN 61010-1:2001. |
Physical Dimensions |
Dimensions (HxWxD) |
260 mm x 340 mm x 152 mm (10.25" x 13.4" x 6"). Excluding accessories and projections. |
Net Weight |
6.8 kg (15 lbs). Excluding accessories. |
General |
Power (AC) |
90-264 Vac, 47-63 Hz (90-132 Vac, 380-420 Hz); Max. Power Consumption: 200 VA |
Power (DC) |
DC Power and Battery Power Input 19-25 Vdc. DC Power IN = 1 IEC320 Port. Battery Power IN = 2 IEC320 Ports (no loss of power when changing batteries). |
Warranty and Calibration |
Three year warranty. Calibration recommended yearly. |
